How to use:
Time on the menu: If the total time accumulated less than 100 hours, display format will be: HH:MM (H: hour, M: minute). If time accumulated exceeds 100 hours but less than 10000 hours, display form will goes to 3 to 4 digits include hours, minutes will be omitted then.
Cash amount: it can hold 500 bills as maximum.
Starting quantity: setting range: 1-10; corresponds to 1-10 bills.
Starting time: setting range:1-15; corresponds on time 1-15 minutes.
Massage chair: time for reclining down before working, setting range is: 0-30; corresponds on time: 0-30 seconds.
Password setting: when screen shows "SUP_"(supervisor) or "USE_"(user), press button to enter password setting, screen will show a blank as this "_ _ " to remind you insert into a password which must consist 4 digital numbers, then press “save”, the screen will show a blank again for second time confirm on password.
Delete the time accumulation: keep pressing for 3 seconds on the time accumulated, the display screen will show "CLEA", the time will be deleted after 6 seconds. When this step is done correctly, the screen will show"0".
Delete the accumulative amount: same way as above, keep pressing for 3 seconds on the amount accumulated, the display screen will show "CLEA", the amount will be deleted after 6 seconds. When this step is done correctly, the screen will show"0"
Display area for the setting data, running time, remaining time
After the machine is initialized, the screen will show "rESt".
After it recovered from the standby state, the screen will show"0".
If the inserted bill didn't get through, the screen will show "_ _ X".
If the inserted bill gets through, the screen will show time "XX: XX"
When an error occurred, the screen will show the malfunction code (ErrX)(X:0-3).
Under the standby state, you can check or change the settings. (Referred to "remote controller" chapter for details), When change on the settings,"_ _SS" will be flashing on.
If the system is running well, the screen will only show a TIME
When you check or change the total time, "TOTAL" and "TIME" will appear on the screen.
When you check or change total bill quantity, "TOTAL" and "MONEY" will appear on the screen.
When you set on the starting time, "SET" and "TIME" will appear on the screen.
When you set on time for the massage chair reclining, "SET" and "TIME" will appear on the screen.
Preparation before using:
Find an installation place where has an appropriate safety distance from surrounding objects. The horizontal distance should be over 50cm between the peak point and bottom point of the backrest.
The horizontal distance should be over 15cm between the peak point and bottom point of the footrest.
Three condition will be shown on the screen if it doesn't work,
If Err0 it means the internal communication is abnormal.
Err1 it means the massage mechanism reposition is abnormal.
Err2 it means the bill acceptor initialization is abnormal.
When this vending massage chair is in the standby state, it is the time to insert bill. When the quantity of the inserted bills are less than the set starting quantity, the screen will show the current bill quantity, when the bill quantity is equal to the setting quantity, the machine will start to show the corresponding running time, If no more bills are inserted within 5 seconds, the machine will begin to work. When the inserted bill quantity is more than the setting quantity, every inserted bill will make the time increase accordingly (the added value: starting time / starting bill quantity). For example: 3 bill for starting up, the starting time is 2(2 minutes i.e.120second), then every bill inserted additionally will make the time increase for 120sec/3=40 seconds.
Shutting off the machine
When the remaining time on the display screen is 0, all the massage functions will be shutting off, the screen will show "rESt", and then this banknotes operated massage chair will be in the state of reposition, after the massage mechanism finished its reposition, the massage chair will return to a standby state. screen will show"0".
Take out the cash
2,Take out the cash box
Total amount quick inspection
Put the magnetic pen on the top of the total amount quick inspection point, the screen then displays the accumulative amount, remove the magnetic pen away, then the screen will return to normal state after 3 seconds.